Hesston by Massey Ferguson 1300 Series Mower Conditioners

From economy models with conditioning options to center-pivot disc models, rugged Hesston by Massey Ferguson® 1300 Series mowers are all you need to bring in your hay crop quickly — and in great condition.

Key Benefits

Technology & Innovation

The 1376 offers commercial-grade, centre-pivot mowing and conditioning thanks to the patented RazorEdge header. A modular, heavy-duty design adds durability, eliminating costly downtime. The drivetrain is designed to handle maximum loads at all times. The RazorEdge header features sealed bearings that don't require constant lubrication, no mater the slope of the terrain.
EFFICIENT RAZOREDGE CUTTING POWER

EFFICIENT RAZOREDGE CUTTING POWER

The RazorEdge cutterbar has a low-profile spur gear design for efficient power transfer to the discs.

ADJUSTABLE WINDROW FORMATION

ADJUSTABLE WINDROW FORMATION

Movable swath wings and swath board allow for precise windrow width.

CONDITIONER OPTIONS

CONDITIONER OPTIONS

Options for conditioners include steel on steel (ideal for heavy crops and crimping plant stems instead of crushing them) and rubber on steel (less aggressive than steel on steel for light crops).

HEAVY-DUTY DRIVE

HEAVY-DUTY DRIVE

A heavy-duty cast gearbox transfers power from the right angle gearbox to the conditioners.

CONDITIONER ROLL TENSIONING

CONDITIONER ROLL TENSIONING

Conditioner rolls are tensioned hydraulically by an industry-exclusive system to provide even and consistent pressure on both sides of the top conditioner roll. The system bleeds the lift circuit pressure with a needle valve to set the desired pressure.

CENTER-PIVOT TONGUE

CENTER-PIVOT TONGUE

A center-pivot tongue allows the mower to operate on either side of the tractor and follow behind during road transport.

HEADER FLOTATION

HEADER FLOTATION

Independent springs on each side adjust ground pressure for even terrain following and clean cutoff.

Slice through tough, tangled crops at speeds that can only be attained with a rotary disc machine and the maneuverability that the Hesston by Massey Ferguson 1300 Series center-pivot models can provide. Choose the 1393 with its 13-foot cutting width or step up to the 1316 S with its 16-foot cutter bed.
EFFICIENT RAZOREDGE CUTTING POWER

EFFICIENT RAZOREDGE CUTTING POWER

The RazorEdge cutterbar has a low-profile spur gear design for efficient power transfer to the discs.

CONDITIONER ROLL TENSIONING

CONDITIONER ROLL TENSIONING

Conditioner rolls are tensioned hydraulically by an industry-exclusive system to provide even and consistent pressure on both sides of the top conditioner roll. The system bleeds the lift circuit pressure with a needle valve to set the desired pressure.

FRONT HITCH

FRONT HITCH

There are two options for attaching the mower to the tractor, a drawbar or a two-point lower link.

CONDITIONER OPTIONS

CONDITIONER OPTIONS

Options for conditioners include steel on steel (ideal for heavy crops and crimping plant stems instead of crushing them) and rubber on steel (less aggressive than steel on steel for light crops).

CENTER-PIVOT TONGUE

CENTER-PIVOT TONGUE

A center-pivot tongue allows the mower to operate on either side of the tractor and follow behind during road transport.

HEAVY-DUTY DRIVE

HEAVY-DUTY DRIVE

A heavy-duty cast gearbox transfers power from the right-angle gearbox to the conditioners.

HEADER FLOTATION

HEADER FLOTATION

Dual springs on each side adjust ground pressure for even terrain following and clean cutoff.

HYDRAULIC THIRD LINK

HYDRAULIC THIRD LINK

A hydraulic third link allows the operator to easily adjust the header tilt from the cab.

ADJUSTABLE WINDROW FORMATION

ADJUSTABLE WINDROW FORMATION

Movable swath wings and swath board allow for precise windrow width.

TURBULENCE REDUCTION ROLL

TURBULENCE REDUCTION ROLL

The third smaller roll in-between the cutterbar and the conditioners helps minimize the air current and improves feeding from the cutterbar to the conditioners for a more consistent windrow.

Slice through tough, tangled crops at speeds that can only be attained with a rotary disc machine and the maneuverability that the Hesston by Massey Ferguson 1300 Series center-pivot models can provide. Choose the 1393 with its 13-foot cutting width or step up to the 1316 S with its 16-foot cutter bed.
EASY-ACCESS MAINTENANCE

EASY-ACCESS MAINTENANCE

Removable panels on each end of the header frame allow for easy access during maintenance.

IMPROVED CAGE/AUGER SETUP

IMPROVED CAGE/AUGER SETUP

Enclosed cages and high-flow augers are arranged to help move the crop over to the conditioner rolls to create a smooth and even crop mat.

EFFICIENT RAZOREDGE CUTTING POWER

EFFICIENT RAZOREDGE CUTTING POWER

The RazorEdge cutterbar has a low-profile spur gear design for efficient power transfer to the discs.

CONDITIONER OPTIONS

CONDITIONER OPTIONS

Options for conditioners include steel on steel (ideal for heavy crops and crimping plant stems instead of crushing them) and rubber on steel (less aggressive than steel on steel for light crops).

CONDITIONER ROLL TENSIONING

CONDITIONER ROLL TENSIONING

Conditioner rolls are tensioned hydraulically by an industry-exclusive system to provide even and consistent pressure on both sides of the top conditioner roll. The system bleeds the lift circuit pressure with a needle valve to set the desired pressure.

HEAVY-DUTY DRIVE

HEAVY-DUTY DRIVE

A heavy-duty cast gearbox transfers power from the right-angle gearbox to the conditioners.

FRONT HITCH

FRONT HITCH

There are two options for attaching the mower to the tractor, a drawbar or a two-point lower link.

CENTER-PIVOT TONGUE

CENTER-PIVOT TONGUE

A center-pivot tongue allows the mower to operate on either side of the tractor and follow behind during road transport.

TURBULENCE REDUCTION ROLL

TURBULENCE REDUCTION ROLL

The third smaller roll in-between the cutterbar and the conditioners helps minimize the air current and improves feeding from the cutterbar to the conditioners for a more consistent windrow.

HEADER FLOTATION

HEADER FLOTATION

Dual springs on each side to adjust ground pressure for even terrain following and clean cutoff.

HYDRAULIC THIRD LINK

HYDRAULIC THIRD LINK

A hydraulic third link allows the operator to easily adjust the header tilt from the cab.

ADJUSTABLE WINDROW FORMATION

ADJUSTABLE WINDROW FORMATION

Movable swath wings and swath board allow for precise windrow width.

Available Models

Models

Cutting Width ft. (m)

PTO HP (kW)

Pull

Conditioner Options

Cutterbar

1376 9.75 (3) 75 (55) Center Steel, Rubber, Tine RazorEdge
1393 13 (4) 100 (75) Center Steel, Rubber on Steel RazorEdge
1316 S 16 (4.9) 120 (89) Center Steel, Rubber on Steel RazorEdge

2024 Range Catalogue Out Now

It is our pleasure to bring you a selection of our latest product range. 

View Now

Find a Dealer