Massey Ferguson, a worldwide brand of AGCO (NYSE:AGCO), is delighted to announce the addition of a continuously variable transmission option for its MF 3 speciality tractor range.

The MF 3 Speciality series includes five models from 75–115hp, each available in five working widths for specialised vineyard, fruit and orchard applications. The range already benefits from a choice of six mechanical transmissions, depending on model, but the new, Dyna-VT option for 105–115hp models will elevate the user experience, allowing them to fully concentrate on the application and their surroundings.

“Our MF 3 Speciality series is relied upon by specialist users worldwide, many in particularly demanding environments including hillsides and narrow vineyards,” explained Jérôme Aubrion, Director Marketing Massey Ferguson, Europe & Middle East. “Continuing our commitment to answering the needs of all types of farms, we are extremely pleased to add this new transmission option, to provide an even better operator experience and increase working accuracy, efficiency and automation.”

MF 3 Speciality Dyna-VT

• New, continuously variable transmission for simple operation
• Precise speed control from 0.1 to 40kph for precision applications
• Automatic travel and engine management maximise fuel efficiency
• Cruise control to maintain set speeds
• Two engine speed memories add convenience
• 40kph maximum speed saves time travelling between sites
• Available for models 105–115hp

Real advantages

For tasks such as mowing, pruning and residue mulching, stepless Dyna-VT allows users to constantly optimise the travel speed to suit the conditions, while for fertiliser or crop treatment applications a constant speed is easily maintained whatever the terrain.

The new transmission comes with selectable automatic and manual operating modes. Automatic mode simplifies operation, allowing the driver to control the speed using the accelerator pedal while the engine and transmission are automatically optimised to keep engine revs low and save fuel.

Manual mode allows the operator to adjust the engine and transmission independently, to suit a preference or task.

Smart features to simplify operation

Cruise control brings advantages when operating on hilly or undulating terrain by automatically maintaining pre-set travel speeds, while the user focuses on the task in-hand.

Virtual operating speed ranges can be set, to suit field, yard or transport applications. Working within pre-defined low- and high-speed parameters makes precise speed control easier and increases accuracy during field operations.

Operators can adjust the permissible engine speed drop (engine droop) under load, within a range of 0–100%. When a constant engine speed is essential, such as operating PTO- or hydraulic-powered implements, then a value closer to 0% can be selected. Where larger engine speed variations are permissible, then selecting a higher percentage and allowing revs to reduce further under heavier loads provides potential fuel savings.

Generously equipped

The new Dyna-VT transmission has been designed to provide maximum operating efficiency whatever the desired working speed, and the maximum 40kph for transport is achieved at just 1,750rpm.

Dyna VT models come with 540, 540e, 1,000 and 1,000e PTO outputs. Electro-hydraulic speed selection is through the dashboard display.

The 3t rear linkage lift capacity is among the highest in the tractors’ size and type class. Hydraulic oil flow of 95 litres/min through four spool valves is standard, with up to eight couplers available as an option.

Ready for complex tasks

In the cab, the MF 3 Speciality series’ straightforward operating concept is maintained. Air conditioning and CAT 4 filtration ensure a comfortable and safe cab environment.

The dashboard-mounted LCD display gives a clear view of all essential operating information. User-friendly menus are used to access and set-up tractor systems including engine and transmission management, PTO and hydraulics as well as automatic control sequences for headland turns.

Transmission operation is through a single main joystick, ideally located in front of the armrest. Using the multi-function joystick, the operator can shuttle between forward and reverse, activate the engine speed memory, select the drive take-up aggression and high or low ranges, or switch between manual and automatic transmission modes using large, practical buttons. A separate, smaller joystick on the main control panel provides convenient operation of hydraulic functions.

For maximum efficiency and productivity, the tractors come ISOBUS-ready. Guidance solutions are easily added in the form of MF EZ-PILOT or EZ-Pilot PRO steering systems, allowing the operator to focus on the work activity.

Complete package

Those needing the most capable specialist tractor solution need look no further than the MF 3 Speciality Dyna-VT models, being displayed for the first time at Agritechnica. With automatic engine and transmission management, extra automation, and optional GPS guidance and steering packages, operators can concentrate fully on complex implements and challenging work environments from the comfort of the air conditioned, CAT 4 cab. Four PTO speeds, a choice of hydraulic specifications, ISOBUS compatibility and generous rear lift capacity allow use with the most demanding modern implements, making these tractors the ideal choice for specialist operations.

About AGCO

AGCO (NYSE: AGCO) is a global leader in the design, manufacture and distribution of agricultural machinery and precision ag technology. AGCO delivers value to farmers and OEM customers through its differentiated brand portfolio including leading brands Fendt®, Massey Ferguson®, PTx and Valtra®. AGCO's full line of equipment, smart farming solutions and services helps farmers sustainably feed our world. Founded in 1990 and headquartered in Duluth, Georgia, USA, AGCO had net sales of approximately $11.7 billion in 2024. For more information, visit www.AGCOcorp.com.