Dyna-VT... Now with 50 km/h option
* Dyna-VT continuously variable transmission (CVT) is standard on all models. At 290hp (315 hp at 2000 rev/min), the top of the range MF 8480 is one of the most powerful tractors currently available with CVT.
* Dyna-VT allows operators to select any combination of engine speed and forward speed to optimise output and achieve the best results.
* Engine revs can be set for the precise combination of power and torque required for the best work quality, resulting in optimum fuel economy and lower noise.
* A range of automatic functions and operating modes further enhance and simplify handling, providing high outputs with the best working quality. The transmission also enables the engine to work at minimum required engine speed for most economical operation.
* Now with a top speed of 50km/h, Dyna-VT's benefits are further enhanced with even higher fuel savings for transport and haulage. In manual (lever) operation, pushing the lever forward selects the highest ratio and when top speed is attained, it is then possible to throttle back to the most effiecient engine revs.
* Dyna VT's ‘Power Control’ lever provides smooth forward and reverse shuttling, neutral and also changes the speed in both directions by simply pushing the lever forward or pulling it back. The further it is moved, the faster the tractor goes. The lever in the right armrest of the seat enables the operator to also conveniently alter the forward and backward speed of the tractor in work.
* Switching to Pedal Mode allows operators to select one of several automatic operating modes - Power, ECO, Forager - where the pedal is used to alter the speed of the tractor.
Power mode
Ideal for hauling heavy trailers when the control ensures the maximum engine output, to minimise journey times.ECO mode
Suitable for hauling empty trailers, light road or field work. ECO mode sets the system for maximum economy, with the transmission increasing forward speed at low engine rpm - saving fuel and reducing noise.Forager (PTO) mode
Engine speed is set by the engine speed control at PTO speed and remains constant regardless of forward speed. Operators can vary forward speed with hand or foot ‘throttle’ to ensure perfect working quality or to match swath conditions when, for example, baling or foraging.
* The Supervisor dial allows operators to vary the percentage that the engine speed drops in response to changes in load before the transmission changes speed -maximising performance in different conditions.
* Two forward speeds (SV1, SV2) can be memorised, allowing operators to set the ideal work speed (SV1) and then quickly flick to the other (SV2) when, for example, turning on headlands.
