Features & Benefits
 

Hydraulics

The open center 15 gallon per minute system uses dual pumps that send high-pressure oil (2,684 psi) to  the steering, remotes, and 3-point hitch, while additional flow goes to the PTO clutch, PFA, differential lock and transmission.

The combined flow hydraulic system has 34.8 gallons per minute total flow.  When the electro-hydraulic combining switch is activated the system  will deliver 26.4 gallons per minute to the remotes. This will increase the speed and response time of the hydraulic implement.

 		 

 

The 29 gallon per minute load sensing system available on cab models over 85 PTO horsepower.  This closed center system uses an axis hydraulic pump giving the system pressure  and flow compensating ability.   This allows the operator to designate the amount of flow to each valve. It will allow the option of live 3rd function on an MF900 Series loader if set up with proper equipment.

Two hydraulic remotes are standard and you have the option of adding additional remote valves for a total of four.

   Related Links:
Operator’s Area
 
Engine
 
Hydraulics
 
Transmission