MF 5400 125 - 145 hp

115-135hp models equipped with 4- or 6-cylinder engines. Key advanced technology features include four valves/cylinder, common-rail fuel injection, waste-gated turbochargers, intercoolers and electronic control.

These features deliver up to 8% higher maximum power and 11% more torque across all engine speeds.

Each model also gets an extra 10hp (ISO) power boost.

Up to an additional 13hp is generated automatically in 3rd and 4th gears to help reduce journey times and increase efficiency when hauling, mowing, baling cultivating and fertiliser spreading.

All engines deliver superb fuel economy across a wide operating range even in the most demanding conditions.

Offering four powershift steps in four gears providing 16F/16R speeds and completely clutchless operation, Dyna-4 is standard on 115hp-135hp models.

Dyna-4 comes with the renowned left-hand, dash-mounted Power Control lever for effortless forward and reverse shuttling. Operators can also set shuttle sensitivity by means of a small rotary dial – more aggressive for fast, quick-cycle work such as loading muck, or slow and smooth for jobs like stacking pallets.

Developed from MF’s well-accepted and well-proven Dyna-6 transmission unit, after starting the tractor with Dyna-4, there is no further need to use the clutch to change any speeds or direction.

Four speeds in each gear can be changed under load simply by the flick of a lever. The ratios can also be selected, without using the clutch by simply pressing a button on the console-mounted lever.

 For specialist users, option of a 4:1 creep (24/24) or 14.1 supercreep (32/32) transmission offering speeds down to less than 0.5 km/h and 0.14 km/h at 2200 rpm respectively.

All MF 5400 Series models can be specified with a range of PTO equipment to suit all types of work and applications.

Options include 540rpm six-spline, 540/1000rpm six and 21 spline (exchangeable) and six and 21 spline flange fitting.

All PTO speeds are shiftable from both inside and outside the cab.

Economy (1500rpm) and proportional ground speeds also available.

Standard PTO specification may vary from market to market. Please check with your local Massey Ferguson dealer.

The MF 5400 cab style and structure offers industry-leading standards of comfort, visibility and control.

Optional cab suspension is now available on all flat floor cab versions, providing even greater safety & and enhanced operator comfort when you need it most.

Superb all-round visibility through the glass-to-floor doors, and ideally placed ‘B’ pillars ensure a good view to the side and back through opening rounded rear three-quarter windows.

Manually-adjusted pneumatic suspension seat and fold-down passenger seat  as standard.

Air conditioning is standard on all models.

All controls laid out logically in a new side console where the single gearlever, spool valve levers and hydraulic controls fall easily to hand.

Standard lift of 5000 kg is one of the best hitch capacities in its class – enables the MF 5400 to handle a wide range of mounted equipment. Larger models feature 75mm rams increase lift capacity to 6000 kg.

Three-point linkage control is via MF’s renowned lower link Electronic Linkage Control (ELC)- using MF’s ‘mouse’ unit and the ELC panel fitted to the cab’s new right-hand side console, providing you with greater control of your implements.

Hydraulic power on 110-145hp models comes from a two-pump, open-centre system (43 and 57 litre/min) to supply up to four single or double acting mechanically-operated spool valves or a combination of both.

6-cylinder models feature optional 2.5 tonne capacity integrated front linkage and PTO. New front axle support casting provides a neat, compact mounting for additional strength and a tighter turning circle.
Factory fit loader ready option. Visit the MF 900 series loaders page for more information.