MF 2100 800 x 700 mm - 1200 x 1280 mm bales

High output, low downtime, fast payback

High output, low downtime, fast payback

Manufactured at our plant in Hesston, Kansas, this range of high-capacity, large, rectangular balers promises hassle-free baling - ideal for family farms, livestock enterprises, contractors and large straw and silage producers.

Check out the very latest MF 2170 XD which achieves 15-20% greater density than the standard model.

For perfect bales produced in less time and transported at less cost, the MF 2100 Series delivers on every front. All models produce solid bales of consistent quality, and feature the original pre-compression chamber and double-knotter designs pioneered at the Hesston plant in the United States.

MF large square balers have always had the strongest reputation for reliability and the ultimate in throughput. On top of that, they boast straightforward maintenance, low cost of ownership and bale sizes that allow both efficient loading onto trucks and ease of storage.

Model	Bale Size (W x H)	Plunger Speed	Pickup Working Width

MF 2140	800 x 700 mm	47 strokes/min	2260 mm
MF 2150	800 x 880 mm	47 strokes/min	2260 mm
MF 2160	1200 x 700 mm	47 strokes/min	2260 mm
MF 2170	1200 x 880 mm	47 strokes/min	2260 mm
MF 2170 XD	1200 x 880 mm	47 strokes/min	2260 mm
MF 2190	1200 x 1280 mm	33 strokes/min	2260 mm

Features

Unique in-line design;

• Covering all the common sizes required by today’s farmers, contractors, hay & straw merchants, and industrial consumers of large square bales.

Choice of configuration;

• All five models available as a standard ‘packer’ or ‘cutter’ variant.
• All five models available with single or tandem self steering axle.
• The tandem axle allowing safer higher road speeds and significantly enhanced ride - both infield and in transport.

Pre-compression chamber;

• Ensures a full wad is loaded into the bale chamber even when baling small or uneven swaths.

2.26 m wide high capacity pick-up with four ‘Quad augers’ for superb feeding;

• Able to efficiently handle the widest of windrows.

‘Easy-fill’ string boxes;

• Enough for a full days work with capacity for 30 balls of twine.

Fully integrated on board hydraulics;

• It does not matter which hydraulic system the tractor has, whether it’s ‘open centre’ or closed centre load sensed’ the baler hydraulics are completely independent.
• Low power requirement for the system.

Fully integrated, hydraulically driven, high performance knotter blower;

• Enabling trouble free knotter performance.

Built-in, Auto-lube knotter lubrication as standard;

• Allowing trouble free knotter performance.

New Integrated Bale Weighing System option;

• This simple yet accurate design weighs the bales precisely as they exit the chamber and pass onto the roller bale chute.

ISOBUS 11783 Compatible Implement;

• Allows for simple and easy connection to an ISOBUS compatible tractor.

2.2 High Capacity pickup with four 'Quad augers' for superb feeding

Able to efficiently handle the widest of wind rows

Heavy Duty Flywheel and Gearbox

Specifically designed and constructed for high operating speeds and high impact force

Pre-compression chamber

Ensures a full flake is loaded into the bale chamber even when baling small or un-even swaths

Main plunger

Heavy duty self cleaning plunger supported on four heavy duty rollers

Slot cleaners to help clean needle slots of debris and stones

Needle brushes to clean material and debris off the tip of the needles

Heavy Duty Double Knotters

Ties two knotts per cycle

Knotts are tied under less tension giving highly accurate and consistent knotter performance

Fully intergrated, hydraulically driven, high performance knotter blower

Enabling trouble free knotter performance

'Easy-fill' string boxes

Enough for a full days work, with capacity for 30 balls of twine.

Auto-lube Knotter lubrication as standard

Allowing trouble free and reliable knotter performance

C1000 baler monitor

Large seven inch (17.75 cm) full colour screen.

Excellent clarity

Selectable information can be displayed on the work screen

Video compatible

New Integrated bale weighing system option

This simple yet accurate design weighs the bales precisely as they exit the chamber and pass onto the roller bale chute.

ISOBUS 11783 Compatible implement

Allows for simple and easy connection to any ISOBUS compatible tractor

MF 2100
2Mb (PDF)
MF 2140
742Kb (PDF)

What do you want to do next?

Dealer Locator

Find Your Dealer

Brochure Request

Request a Brochure

Testimonial

I’m really impressed with its appetite. In straight-line straw baling, producing 600 kg bales, we achieved 27 bales in just 21 minutes, I also appreciate the simplicity of the machine. It is easy, for example, for operators to make adjustments in the field.

Keith Wilson, Shropshire, UK

Tell us what you think