World debut for new Massey Ferguson tractors at EIMA
Massey Ferguson is exhibiting a vast array of new and improved equipment at the EIMA Show in Bologna, on 12th-16th November.
MF 8690 at EIMA show
Massey Ferguson is exhibiting a vast array of new and improved equipment at the EIMA Show in Bologna, on 12th-16th November. New models span the power bracket from the latest MF 3600 GE versions through to the MF 8600 Series, which includes the industry’s most powerful and technically advanced conventional four-wheel drive tractor.
“Massey Ferguson now has its best, most comprehensive range we have ever built. At the EIMA Show visitors will find that virtually every machine on display has been introduced since the previous event,” says Campbell Scott, Massey Ferguson General Sales Engineering and Brand Development manager. “Indeed, as well as launching important new additions to the MF 3600 Series, the entire MF 8600 Series will be making its debut at the event.
“As we come to end of Massey Ferguson’s 50th year celebrations, we look forward to an even more exciting future in terms of new product development, which will surpass anything that has been seen in the past five decades. This is a fitting time to launch the whole MF 8600 Series, which represents not only Massey Ferguson’s pioneering spirit, innovative engineering and quality, but also our vision and leadership in yet again being the first to introduce world-leading technology.”
The quest for quality, innovative features and pioneering world-class developments is not, however, restricted to Massey Ferguson’s most powerful tractors. Throughout its ranges the company ensures that there is a model with the power and specification to match every conceivable task. Testament to this is the EIMA launch of the MF 3600 GE models that further extend this important range of standard and specialist tractors.
Massey Ferguson at EIMA:
- World debut for the new MF 8600 Series: Five models from 270hp to 370hp, powered by the most advanced engines from AGCO Sisu Power (formerly Sisu Diesel). Available with the cleanest, most fuel efficient e3 Selective Catalytic Reduction technology as standard on Excellence versions and option on standard models
- Four new extremely low ‘GE’ tractors in the MF 3600 Series from 69hp to 100hp (ISO). Equipped specifically to provide the lowest operational height for specialist crops including table grapes, Kiwi fruit, apricots and peaches as well as work in all overhanging crops and low buildings
- Full range of recently launched MF 3600 Series in V, S and F versions designed especially for working in Vineyards, Specialist crops, rows and in confined spaces. A huge range of specifications and options provide an unrivalled choice in this important sector
- Latest models in the MF 5400 Series – an outstanding fleet of multi-purpose workhorse tractors, offering a wide range of features and specifications from 86hp to 145hp (max ISO), four and six cylinder engines, as well as platform options on some models
- New MF 6497 and MF 6499 flagship models, powered by the latest generation AGCO Sisu Power common rail and four valve/cylinder engines, offering Power Boost and top economy from standard Dyna-6 ECO transmission
- Massey Ferguson MF 2100 Series large square balers, which set the industry standard. These new machines provide unparalleled performance in hay, straw and silage along with significant increases in bale weight and density
- Xtra specification models in the MF 8900 Series telescopic handler range provide higher specifications and control.
MF 8600 Series:
World debut for Massey Ferguson’s Flagship range
Massey Ferguson’s outstanding MF 8600 Series flagship tractors will be making their world public debut at EIMA. Massey Ferguson is introducing two distinct levels of specification for this top technology series - the MF 8600 and the MF 8600 ‘Excellence’ models.
Standard versions of the MF 8650, MF 8660, MF 8670 and MF 8680 are powered by the renowned Stage 3/Tier 3 AGCO SISU POWER 8.4 litre engines, equipped with common rail, four valves/cylinder and Electronic Engine Management control. These models feature new four-point OptiRide cab suspension, Datatronic 4 Control Centre Display (including video input and ISOBus compatibility) and new Dyna-VT transmission with Dyna-TM control.
MF 8600 Excellence models are equipped with top technology as standard.
Along with the most advanced AGCO Sisu Power Citius e3, SCR engines. These provide at least a 5% saving in fuel and the cleanest exhaust emissions, with significantly reduced NOx and Particulate Matter (PM) levels compared with other designs.
Other class-leading features include 5,000kg capacity integrated front linkage system (IFLS), SpeedSteer, OptiRide Plus Dynamic cab suspension. They are also supplied AutoGuide ready as well as having climate control air conditioning. There is even a solar panel on the roof to maintain the battery charge.
MF 8600 and MF 8600 Excellence:
| |
MF 8650 |
MF 8660 |
MF 8670 |
MF 8680 |
MF 8690* |
| Engine (AGCO SISU POWER) |
8.4 litre |
8.4 litre |
8.4 litre |
8.4 litre |
8.4 litre |
| Max. Power |
270 hp |
295 hp |
320 hp |
350 hp |
370 hp |
| Max. Torque |
1,185 Nm |
1,295 Nm |
1,400 Nm |
1,492 Nm |
1,540 Nm |
* Selective Catalytic Reduction (SCR) e3 technology is standard on the MF 8690, in ‘Excellence’ specification and is an option on all others.
All MF 8600 Series tractors are equipped with a new heavy duty version of the renowned Dyna-VT continuously variable transmission. This new unit further increases fuel efficiency and control with the new Dynamic Tractor Management (DTM), which provides an electronic link to the engine. This system automatically adjusts the engine speed for optimum operation and ultimate fuel economy.
Massey Ferguson has developed a completely new, supremely quiet four-pillar cab for the MF 8600 flagship tractors. Inside this is equipped with a new ‘Control Arm and ‘Datatronic Control Centre’ Display.
Ultimate comfort is offered by the new OptiRide cab suspension system that provides a 30% increase in comfort without roll or pitching. For additional comfort is the OptiRide Plus dynamic cab suspension - standard on MF 8690 and Excellence models and option on other MF 8600s.
To ease operation and manoeuvrability is the novel SpeedSteer function, which is standard on the Excellence models. This allows operators to adjust the ratio of steering wheel turns to the front wheel movement.
All the new MF 8600 Series tractors are built on an entirely new heavy duty chassis structure with factory fitted fully Integrated Front Linkage (IFLS) on Excellence models, which is an option on the others. This can also be equipped with a new front PTO drive.
Continuing with the high specification is a new heavy-duty front axle that is equipped with QuadLink suspension as standard on all tractors. This not only improves safety and comfort, but also increases traction in the field. At the rear the chassis is fitted with the latest generation, high capacity transaxle design that provides an impressive 12,000kg lift capacity on the three point linkage.
The MF 3600 GE Series features:
- Lively, powerful and high torque AGCO SISU POWER three-cylinder engines generating powers of 69hp to 100hp
- Compact dimensions: The bonnet, at 1.24m, is the highest point, with fender and steering wheel height reduced. On the new footstep version the fenders sit at 1.12m when the tractor is fitted with 380/70 R 20 rear tyres. Maximum height of 2.26m on the cab version equipped with 20in rear tyres and in widths from 1.15m to 1.50m
- Unique ‘SuperTurn’ front axle design for simply exceptional manoeuvrability
- Wide transmission choice to suit all specialities. Including:
- Well proven 12/12 speed
- 24x24 Speedshift as an option (40km/hr)
- 24x24 shuttle gearbox as an option (Cab version only) – (40km/hr)
- 24x24 power-shuttle as an option (Cab version only) – (40km/hr)
- Exclusive electro-hydraulic IPTO
- Operation with a range of speed options
- Standard 2,500kg rear linkage lift capacity
Massey Ferguson MF 3600 GE tractors
| Model |
Engine / Cylinders |
hp (ISO) |
Capacity |
| MF 3625 GE |
AGCO SISU POWER 33DTA |
69 hp |
3.3 litres |
| MF 3635 GE |
AGCO SISU POWER 33DTA |
80 hp |
3.3 litres |
| MF 3645 GE |
AGCO SISU POWER 33DTA |
92 hp |
3.3 litres |
| MF 3655 GE |
AGCO SISU POWER 33DTA |
100 hp |
3.3 litres |
DTA = Turbocharged and intercooled
High torque and power from advanced AGCO SISU POWER engines
All the MF 3600 GE Series tractors are powered by the latest, most advanced, AGCO SISU POWER 3.3 litre, three cylinder engines – the first in the sector to meet the strict Tier 3 exhaust emission regulations. The exhaust pipe is now under slung on the left-hand side.
Peak performance is ensured by the engine’s outstanding power and torque characteristics. The superior design develops maximum torque at 1,400rpm, which enables the tractors to pull through tough conditions with fewer gear changes, for optimum output and enhanced fuel efficiency.
Simply superb manoeuvrability
The compact three-cylinder AGCO SISU POWER engines - 28mm shorter than the four-cylinders used previously – provide extra room and flexibility for the front axle support. This, combined with a fully-waisted profile, allows unimpeded movement for the front wheels, producing excellent turning without compromising stability or having to resort to a separate, more complex system.
By using a simple, intelligent design the new MF 3600 GE Series provide very tight turns but with low wear and maintenance requirements along with exceptional reliability. There is also no loss of stability or exaggerated front and rear implement swing when operating with SuperTurn.
All the axles are equipped with a limited slip differential to aid traction in poor conditions and when operating on sloping ground.
Compact dimensions with extra comfort
MF 3600 GE tractors are designed specifically for working in tight spaces, with Massey Ferguson having worked hard to reduce the operating height to the absolute minimum. New fender positions mean these are now just 605mm above the centre of rear axle (125mm lower than standard models) and even the steering wheel has been repositioned so it is 30mm lower down.
This all combines to ensure the GE models provide extraordinary access, allowing the tractors to operate under canopies while maintaining crop quality.
The GE models are available in either footstep or cab versions that come in a range of widths to suit all specific requirements. The external fender width on GE models is contained to 1.0m on cab models and 1.07 on footstep versions. Even when specified with a cab the maximum height is only 2.26m. The new RC100 cab offers a 1.0m external width and is ingeniously designed to make the best use of the available space.
Versatile transmission choice
Whatever the application the MF 3600 GE offers a transmission to suit the task. Transmission choice for tractors without a cab begins with a 12/12 gearbox, offering a top speed of 30km/hr as standard. Alternatively a 40km/hr, 24x24 Speedshift, which doubles the speeds in each gear, is an option.
Tractors equipped with cabs also have the option of a 40km/hr Syncho Shuttle, which provides 24F/24R speeds and a separate synchronised shuttle lever for direction changes. This same arrangement is also available with Speedshift, which employs a button on the gearlever to shift each gear into high and low.
For maximum efficiency is the 40km/hr, 24F/24F PowerShuttle. With this transmission direction changes are made, without the clutch, simply with a flick of a short lever on the left-hand side of the dashboard.
Exclusive Independent PTO offers plenty of options
An exclusive, MF-designed independent PTO, which is operated by an electro-hydraulically engaged, oil-immersed clutch is standard on all MF 3600 GE models.
The system comes with an unrivalled choice of selectable speeds to suit all types of tasks and implements, including: 540rpm, 540/540E (750), 540/1,000rpm.
High flow hydraulics
The new MF 3600 GE tractors have an open centre hydraulic system that is powered by two independent hydraulic circuits to ensure constant, smooth operation of the spool valves and linkage.
The 2,500kg capacity, three-point linkage has cranked lower link arms fitted with either CAT II or adjustable CT I/II ball ends and with straightforward mechanical control. The MF 3600 GE can be specified with up to three hydraulic pumps, which enable high oil flows of up to 62 litres/min, to be distributed through one or two separate circuits.
Up to five spool valves can be specified, including three at the rear and two that are joystick operated and mid-mounted. This makes them ideal hosts for loaders and a multitude of mid- or front-mounted implements.
MF 3600 GE models further strengthen the range
The four new tractors in the MF 3600 GE Series further enhance the MF 3600 Series. These new tractors join the standard models as well as those in the V, F and S Series – all designed and built to meet specific specialist requirements.
Even higher specification for MF 6400 Series flagships
Massey Ferguson’s new MF 6400 flagship models – the MF 6497 and MF 6499 - now offer even higher productivity to users of these powerful and highly versatile tractors.
Along with a new, modern family style and pivoting bonnet, the tractors also benefit from a new heavy-duty front axle. This is fitted to an innovative support, which also incorporates the weight frame or integrated front linkage option.
New features on these new models, which went into production in September, include:
- Latest technology AGCO SISU POWER common rail engines with four valves/cylinder
- Rugged front axle support with new integral linkage design
- QuadLink front suspension option
- ‘Power boost’ for PTO and transport
- Pivoting bonnet improves engine and cooling system access
- Dyna-6, 40 or 50km/hr Eco transmission
- Transport speed* of 40km/hr or 50km/hr achieved at a low 1,900 engine rpm (*top speed depends on market/legislation)
More power and performance from MF 5400 Series
Four new MF 5400 Series models make their EIMA debut. With powers from 86hp to 112hp, these latest high performance tractors provide unrivalled features in every area.
The latest technology common rail, four valve/cylinder engines provide class-leading power and torque for the new MF 5445 and MF 5455, while the smaller MF 5425 and MF 5435 feature straightforward and responsive 4.4 litre, turbocharged and intercooled engines.
The punchy engines, slick changing Dyna-4 transmissions and powerful, high-flow hydraulics combine to provide users with top productivity a wide range of work
New MF 5400 Series models
| |
MF 5425 |
MF 5435 |
MF 5445 |
MF 5455 |
| Max. power at 2,000rpm |
86 hp |
95 hp |
100 hp |
112 hp |
| Rated power at 2,000rpm |
82 hp |
92 hp |
95 hp |
105 hp |
| Boost max. power at 2,000rpm |
N/A |
N/A |
110 hp |
125 hp |
| Max. torque at 1,500rpm |
379 Nm |
405 Nm |
420 Nm |
463 Nm |
| Max. torque boost |
N/A |
N/A |
463 Nm |
525 Nm |
Maximum power is increased by 11hp on the MF 5425, 13hp on the MF 5435, 10hp on the MF 5445 and 12hp on the MF 5455. The electronically-controlled engines in the two larger models also provide the ability to boost the maximum power by up to 13hp for transport – operating automatically when 3rd or 4th gear is selected on the Dyna-4 transmission. This helps to reduce journey times as well as improve fuel efficiency.
All of the four new models The MF 5400 Series are superb loader tractors, providing a unique combination of features including the option of a sloping bonnet.
The MF 5400 Series now comprises nine tractors from 86hp to 145hp (max ISO). All models from the 95hp MF 5445 also provide a Power Boost for transport work – no other manufacturer offers this feature on tractors less than 100hp rated power. These exceptional workhorses pack ‘big’ tractor features into a more compact package, combining superb power to weight ratios with great visibility and easy to use features.
All the MF 5400 Series now feature Massey Ferguson’s acclaimed Dyna-4, semi-powershift transmission, which provides 16F/16R gears and completely clutchless operation after pulling away. The highly efficient mechanical gearbox combines economical operation with ease of use – particularly for loader operations where its standard left-hand ‘Power Control’ lever provides simple shuttling.
A range of PTO systems to suit every type of work and application is available for the MF 5400 Series. Options include 540rpm or 540/1,000 along with economy and ground speeds. All speed changes are shiftable from inside and outside the cab.
Hydraulic power comes from a two-pump, open-centre system that supplies up to four single or double acting mechanically-operated spool valves or a combination of both. Hydraulic flow of 100 l/min is now also available as an option on the two smallest, MF 5425 and MF 5435 tractors.
The six cylinder models in the MF 5400 Series feature an optional 2.8 tonne capacity integrated front linkage and PTO. New front axle support casting provides a neat, compact mounting for additional strength and a tighter turning circle.
The four smaller models, the MF 5425, MF 5435, MF 5445 and MF 5455, are available with either a spacious cab or with an operator platform, which is fully compliant with all EU noise legislation and fitted with a two-post Roll Over Protection Structure. There is also the option of a low profile cab that is just 2.52m high (on 16.9 R 34 tyres).
Massey Ferguson Balers set the benchmark
Built in Massey Ferguson’s Hesston, Kansas factory, the new MF 2100 Series large square balers deliver a big step forward in terms of productivity, bale density and weight, without excessive power demands.
The four-model MF 2100 Series produce a range of bale sizes in straw, hay, silage and haylage. The new flagship, MF 2190, which replaces the renowned MF 190, is proven to produce a consistent bale weight increase of between 10-20% and operate at 20% faster forward speeds.
The four-model range is new from the ground up, combining tried and tested features with new developments to increase baling capacity and further improve reliability. All models now feature sealed, heavy-duty bearings throughout the driveline for high durability.
Xtra technology for MF 8900 Xtra telescopic handlers
Visitors to EIMA will also be among the first to see Massey Ferguson’s new MF 8900 Xtra telescopic handlers. This range now features a new Electronic Speed Control (SCS) system for the hydrostatic transmission, which allows the forward speed to be altered regardless of engine speed.
This unique system, engaged simply with a rocker switch and dial, provides superb control and improves cycle times. It is standard on the MF 8925, MF 8927 and MF 8947 Xtra handlers. In short SCS allows the operator to employ high engine speeds for maximum hydraulic performance, but still manoeuvre safely at suitable forward speeds.
Cab comfort is further improved with the addition of a special resonator in the hydraulic steering circuit, which reduces noise significantly. New hydraulic hose routing for the crowd and tilt circuit and auxiliary service couplers cut wear and improve reliability.
Powered by a new Tier 3 Perkins engine, with improved cooling capacity, the MF 8900 Series Xtra telehandlers have an open-centre, load sensing hydraulic system that allows all actions to be combined, regardless of load. All actions are operated proportionally.